Purelux Radar 9-36V Reversing Lamp with strobe

A warning light with a very low and slender body, approved for road use according to the R65 standard, which can be installed, for example, under the rear bumper of a vehicle. The shock-, water- and dust-resistant construction copes with even challenging conditions and the bright flashing orange light attracts attention from afar. Suitable for both 12V and 24V systems.

Delivery content

• Purelux Radar R65
• Power cord, 350 mm
• Mounting rail
• Rubber mounting backing
• Installation and connection instructions (EN/FI/SE/NO/DK)

Specifications

• Brand and model: Reversing light Purelux Radar R65
• Intended use: As a warning and safety light for traffic and construction sites
• Light color: Orange
• Operating voltage: 9-36V
• Power measured by the light bulb: 18 W
• Operating modes: 6
• Dimensions: 86 x 18 x 56 mm (Width x Height x Depth)
• Height with mounting foot: 29 mm
• Weight: 120g
• Cable length: 350 mm
• Connector: DT-2
• Material: Frame made of aluminum and plastic, lens made of polycarbonate
• IP rating: IP69K
• Operating temperature: -40°C - +60°C
• Approvals: EMC: ECE R10, R65 Class 1, CE, RoHS
• Warranty: 24 months

Quick guide

Coupling

• Red: Power (+)
• Black: Ground (-)
• White: Synchronization / Warning light functions

Instructions

• Synchronization: Synchronize multiple warning lights by connecting their white wires together
• Warning light pattern: Connect the white wire to power (+) for less than 1 second.
• Reset: Connect the white wire to power (+) for at least 3 seconds to return directly to warning light pattern #1
• Alternating Flash: Reset the light group and connect the white wire to power (+) for 1 second to alternate the flashing of the light groups. Two lights can be set to flash alternately at a time.