PURELUX Spectre 7WX - white marker light with warning light 10-30V
PURELUX Spectre 7WX - white marker light with warning light 10-30V
PURELUX Spectre 7WX - white marker light with warning light 10-30V
  • New
PURELUX Spectre 7WX - white marker...
PURELUX Spectre 7WX - white marker...
PURELUX Spectre 7WX - white marker...

PURELUX Spectre 7WX - white marker light with warning light 10-30V

HS16277
219.00 zł
Tax included

178.04878 netto

Product on stock

PURELUX Spectre 7WX - white marker light with warning light 10-30V

Product on stock

100% secure payments
 

Compact, stylish and extremely efficient warning/strobe lights in three different versions: with orange, red or white position light. For installation on the sides, front and rear of vehicles. Each color of the marker lamp is equipped with an orange warning light, so it has unlimited applications with 8 different flash functions!

The Purelux Spectre 7X is a product series that contains three compact, stylish and efficient warning/strobe lights. Spectre 7X are available in orange, white and red, and are approved for road traffic according to the ECE R148 standard, which means they can be used to solve comprehensive lighting solutions for the entire vehicle, both front, side and rear. In addition to a fixed light, all three lights have eight different flashing functions and the orange 7AX light can also be used as a warning light thanks to its ECE R65 approval. The lights of the Spectre 7X series are suitable for heavy vehicles, vans and regular cars, and when mounted on the vehicle, only the essentials are visible: a strong and impressive warning light.

The diameter of the thin-framed lights is only 32 mm, so they can easily be embedded in the holes already ready in the vehicle, and making completely new installation holes is not a big problem either. If desired, the lamps can also be installed in 60-75 mm pipes using the included adapters, so the mounting possibilities are practically unlimited. Thanks to their small size, the Spectre fit inconspicuously in any vehicle, but when lit, even the darkness of the north and the winding roads do not prevent the vehicle from being seen. The lamps' modern appearance, combined with efficient LEDs and nice light distribution, make them an excellent option for both professional drivers and to enhance the appearance of the car. The lamps are suitable for both 12V and 24V systems, and are protected against radio interference according to the R10 standard. Two year (24 month) warranty!

Purelux Spectre 7X lamps are certified according to the ECE R148 standard which includes approvals such as for attention, brake, side marker and daytime running lights. In addition, the same approval allows the light to also be used as a turn signal, and the ECE R65 approval of the orange 7AX light allows it to also be used as a warning light.

Content

  • Purelux Specter 7X (your choice of 7AX, 7WX or 7RX)
  • 2 x Mounting frame
  • Power cord, no plug
  • Installation and operating instructions

Technical specification

  • Make and model: Warning / Flash light Purelux Specter 7X, 32 mm
  • Intended use: As a warning/strobe light or position light in vehicles
  • Operating voltage: 10-30 V (DC)
  • Light colour: White (7WX), orange (7AX) or red (7RX)
  • Power: 6W
  • Dimensions: 25 x 32 mm (Depth x Diameter)
  • Power cable length: 500 mm
  • Weight: 54 g
  • Protection class: IP67
  • Approvals: EMC: ECE: R10, R65, R148
  • Warranty: 24 months

Operating modes

  • Single blink
  • Double blink, fast
  • Double blink, slow
  • Quadruple flashing
  • Single-double flashing
  • Single-quadruple flashing
  • Pulsating
  • Even light

Connecting

  • Red: power (+)
  • Black: Earth (-)
  • Yellow: Selection of operating mode, synchronization, reset
  • White: Alternate sync
  • Green: Parking lights

Operating mode selection/synchronization: Touch the power cord with the yellow wire for less than 1 second to change the operating mode. Connect the yellow wires to the synchronized lights. To switch to standard operating mode, touch the yellow wire to the power cord for at least 5 seconds. With the power off, connect the twisted wire to the power cord of the lights you want to blink alternately.

6 Items
No reviews

16 other products in the same category:

Product added to wishlist
Product added to compare.